I have most of the parts to do a full power brake and power steering upgrade this winter. After trying a mock up run I discovered the bolts were not even the same. The power steering bracket from the 351 Cleveland is 5/8″ and the 302 head bolts for mounting 9/16″. I’m going to have custom brackets made and the bolts fit properly into the head.

I’ll have to clean up the steering box before doing the installation. I checked the play between the rat joint and the pitman arm and there is no discernible movement. I was planning on adjusting it but it’s not necessary. I think I will try brake cleaner or the engine degreaser in a can that’s available at the local auto part store.