I need to work on the Impalas stance. Since it’s going to be static I need figure out the components I’m going to use.

The rear has an air shock which I believe is a Monroe brand that is available at any local parts store. I don’t know if the previous owner did the installation but it was mentioned that he wanted to at some point haul around a trailer. I air shocks would make sense for this application.

This photo is taken with the 14” Supremes and the air shocks with no air. The air valve had an extender going through the rear bumper and it had snapped the main inlet valve, this dumped all the air out.

I’ll be heading to the local auto parts store for a replacement inlet valve. Once I get the minimum shock required air volume I’ll set the stance. I believe the minimum air is 25psi and the maximum is 200psi. I’ll also include the model number once it is confirmed.